701 High-Strength Spray Adhesive
Confirm the application and request the current TDS/SDS for the exact product before ordering.
701 High-Strength Spray Adhesive
QICHEM 701 is an SBS solvent-based contact adhesive for fast-paced furniture and mattress production. Fast positioning and strong initial grab for foam, fabric, curved panels and laminated panels. The current English TDS reports 120 °C heat resistance.
- Fast Tack
- Strong Initial Grab
- No Spring-Back
- 500ml Aerosol & 22L Canister
Typical Applications
- Upholstered furniture manufacturing
- Mattress production
- Laminated panel bonding
- Foam and fabric bonding
- Curved and profiled parts
Key Specifications
- Base: SBS solvent-based contact adhesive
- Flammable: use with adequate ventilation and away from ignition sources
- Solid Content: 40%
- Open Time: 1 hour
- Heat Resistance: 120 °C
- Coverage (approx.): 500ml aerosol 6–7 m² / 22L canister 264–308 m²
- Packaging: 500ml aerosol / 22L canister
- Colour: Natural (yellow transparent liquid)
Reference values from the current 701 English TDS, not acceptance criteria for every application. Coverage is volume-calculated and varies with application. Other values: request the current document.
Download TDS (PDF) SGS test report available on request
Suitable Materials
QICHEM 701 is a contact adhesive compatible with many common substrates, including:
- Foam and sponge
- Fabric and upholstery textiles
- Leather
- Wood, veneer and decorative panels
- Laminated panels — fast positioning, no bounce-back
- Curved and profiled parts — suitable for curved bonding
Always spray a small test patch to check compatibility with your substrate before production use.
How to Use
- Make sure both surfaces are clean, dry and free from dust, oil, wax or grease.
- Spray both surfaces from about 10–20 cm at a right angle, applying an even coat that covers 80–100% of the area.
- Wait until the adhesive is touch-dry — it should not transfer to your knuckle.
- Join the parts and press firmly. Work can continue about 5 minutes after spraying.
- Canister: fit the hose tightly to the spray gun and canister, open the valve slowly and fully, and check for leaks before spraying. Clean a blocked tip with solvent; never use a pin.
Packaging & Coverage
- 500ml aerosol can — approx. 6–7 m²
- 22L canister — approx. 264–308 m²
- Coverage is approximate and depends on application
- TDS: two-sided spray at 10–20 cm, 80–100% coverage
- Colour: natural (yellow transparent liquid)
Why consider 701
- Fast positioning with very high initial grab
- No bounce-back on laminated panels
- Even spray and uniform film
- Small test patch and suitability trial required before production
Storage: use the current TDS/SDS. Store sealed in a cool, dry place, away from direct sunlight, heat, sparks and open flames.
Ask on WhatsApp