Architectural Coating Emulsions · 建筑涂料乳液
- Interior/exterior and primer/topcoat routes
- Specify your coating type and target film properties
- Grade-specific polymer data and TDS on request
Acrylic Emulsions by Application
Acrylic Emulsions by Application
Start with your formulation: architectural coatings, waterproofing, water-based sealants or pressure-sensitive adhesives. Then request an available grade and its current TDS.
Send 5 details: formulation · benchmark · target tests · destination · quantity/packaging.
Exact grade, polymer type, solids, pH, viscosity, MFFT and packaging require the current supplier TDS.
Select sealants and formulation additives →Application-led supply
Request the grade-specific image and current technical documents.
No unrelated stock pack shot represents an unconfirmed emulsion grade.
| Your application | What to confirm with the supplier | Next step |
|---|---|---|
| Architectural coating emulsions · 建筑涂料乳液 | Interior/exterior, primer/topcoat/textured finish; polymer type, solids, viscosity, MFFT and required film performance | Request a matched grade + TDS → |
| Waterproofing emulsions · 防水乳液 | One/two-component system, cement compatibility, exposed or covered use, flexibility and required test standard | Request a matched grade + TDS → |
| Water-based sealant emulsions · 密封胶乳液 | Joint movement, substrate, paintability, indoor/outdoor exposure and filler compatibility | Request a matched grade + TDS → |
| Pressure-sensitive adhesive emulsions · 压敏胶乳液 | Substrate, coating method, tack/peel/holding targets and downstream converting process | Request a matched grade + TDS → |
Waterproofing Emulsions · 防水乳液
For eligible waterproofing formulations. Specify one/two-component design, cement compatibility and exposure; exact grades and test data must be confirmed.
Water-Based Sealant Emulsions · 密封胶乳液
Binder options for sealant formulation. Check joint movement, substrate, paintability and filler compatibility; request the exact grade TDS.
Pressure-Sensitive Adhesive Emulsions · 压敏胶乳液
For suitable PSA formulations. Share the substrate, coating process and tack/peel/holding targets; do not substitute grades without a TDS and trial.